Setting up Yamal 90 KU: Transponders 2026

Overview of Yamal 90 KU transponders

Yamal 90 KU is a satellite that provides television and radio broadcasting services for various regions. It is used to transmit signals in the Ku-band range. The transponders on this satellite are key components that ensure the delivery of content to ground receiving stations.

What is Yamal 90 KU?

Yamal 90 KU is a satellite that is part of the Yamal satellite series launched to provide communication and media content transmission. It is designed to cover both European and Asian regions. The satellite operates on various frequencies and supports multiple transponders, allowing for the transmission of diverse channels and services.

How do transponders work?

A transponder is a device on the satellite that receives, amplifies, and redirects the signal back to Earth. Each transponder operates on a specific frequency and can handle a certain number of channels simultaneously. Various transponders available on Yamal 90 KU ensure the transmission of both standard and high-quality video.

Key parameters of transponders

Yamal 90 KU transponders have different parameters, such as frequency, polarization, and symbol rate. They typically operate in the range of 10.700 to 12.750 GHz, with various types of polarization: horizontal and vertical. The symbol rate can vary from 1 to 45 Ms/s, affecting signal quality and the number of channels transmitted.

Configuring CCcam for Yamal 90 KU

Configuring CCcam to work with Yamal 90 KU transponders requires following a series of steps. CCcam is one of the popular card-sharing protocols that allows users to share access to satellite channels.

Steps to install CCcam

First, you need to install CCcam on your receiver. This is usually done through a web interface or FTP. Make sure your receiver supports CCcam. The installation may vary depending on the model, but generally, the process involves downloading the appropriate package and installing it.

Configuring the CCcam.cfg file

After installing CCcam, you need to configure the configuration file CCcam.cfg. This file is usually located in the directory /etc/. In the file, you need to specify server parameters such as address, port, username, and password. For example:

C: server_address port username password

Pay attention to the accuracy of the entered data, as errors may lead to connection issues.

Checking the connection

Once the setup is complete, it is recommended to check the connection. This can be done through your receiver's menu. If the connection is successful, you should see information about the connection to the server. Otherwise, check the settings in the configuration file and ensure your internet is working properly.

Configuring OScam for Yamal 90 KU

OScam is another popular protocol that allows for managing card sharing. Configuring OScam can be more flexible than CCcam and allows for various parameters.

Steps to install OScam

Install OScam similarly to CCcam. Typically, this is done by downloading the appropriate package and installing it on your receiver. Ensure you have access to SSH or FTP to upload files.

Configuring the OScam.config file

The OScam configuration file is usually located in /etc/oscam/. In this file, you should specify parameters such as server, port, username, and other settings. A sample configuration might look like this:

[reader]
label = myreader
protocol = newcamd
device = server_address:port
user = username
password = password

Make sure to correctly specify all parameters to ensure proper connectivity.

Checking OScam operation

After configuring OScam, check its operation through the management interface. You should see information about the connection and the status of your readers. If issues arise, check the OScam logs for errors.

Troubleshooting

When setting up CCcam and OScam, various issues may arise. Knowing common errors and how to fix them will help you quickly resolve problems.

Common errors

Some common errors include incorrect logins, wrong ports, and internet connection issues. It is also worth checking your router settings, as it may block necessary ports.

How to fix them

To fix errors, check all parameters in the configuration files. Ensure that logins and passwords are entered correctly, and that ports are open on your router. If the problem persists, try rebooting the receiver and router.

Optimization tips

To improve the performance of CCcam and OScam, use the most stable internet connection possible. It is also advisable to keep an eye on software and configuration file updates to avoid compatibility issues.

Additional settings for Yamal 90 KU

To achieve the best results when working with Yamal 90 KU transponders, consider additional settings that may improve signal quality and connection stability.

Antenna optimization

Proper antenna setup is crucial for ensuring a quality signal. Make sure your antenna is correctly aimed at the Yamal 90 KU satellite. This is usually achieved by adjusting the tilt angle and rotation of the antenna. Use a special signal meter to determine when the signal quality is at its maximum.

Using multiplexers

If you have multiple receivers or devices that need to receive a signal from one satellite, consider using multiplexers. This device allows you to split the signal from one antenna into multiple outputs, which is convenient for multi-user systems. Ensure that the multiplexer is compatible with your equipment and supports the necessary frequencies.

Performance monitoring

Regularly monitoring the performance of your CCcam or OScam server will help identify potential issues before they become serious. Use built-in monitoring tools to track the connection status and signal quality.

Logs and diagnostics

Both protocols, CCcam and OScam, have logging capabilities. These logs will help you track all server actions: connections, disconnections, and errors. Regularly check the logs for errors and warnings. This will help you identify and resolve issues more quickly.

Software updates

Keep an eye on updates for CCcam and OScam software. Developers often release updates that can improve performance, enhance security, and add new features. Regular updates will help you utilize the latest technological advancements and avoid compatibility issues.

Security tips

Ensuring the security of your CCcam or OScam server is an important aspect. Use complex passwords for accessing your configuration files and management interface. Do not share your data with third parties and regularly change your passwords.

Data encryption

If your provider supports data encryption, activate this feature. It will help protect your data from interception and misuse. Encryption is especially important if you are using public networks for connection.

Network isolation

It is recommended to isolate the network on which your server operates. Use a separate router or create a separate subnet for your equipment. This will help minimize risks associated with external attacks and unauthorized access to your data.

Who we are and how we verify

Utgard (new.utgard.tv) is a paid card sharing service for satellite TV using newcamd and CCcam protocols.

Before publishing information about Utgard — prices, trial access, devices, payment — it is verified against the service's data. Links to third-party services and devices lead to their official websites; their availability is checked on the day of publication.

Date of verification: 26.09.2026

Sources

• Gazprom Space Systems (Yamal) — official website