Cardsharing NTV Plus at Home: Setup and Connection 2026

Setting up home cardsharing for NTV Plus may seem complicated at first glance. A bunch of forums, conflicting advice, outdated configs. I’ve been through this and can say: if you follow the steps, everything can be set up in an evening. In this article, you’ll find specifics: what hardware to get, which frequencies to enter, what a working CCcam and OScam config looks like, and what to do when channels won’t open.

The main thing to understand right away: your branded receiver from NTV Plus will not work for this. You need a Linux receiver based on Enigma2. And a circular LNB — not a linear one. These are the two most common mistakes beginners make, leading to weeks of frustration.

What You Need for Home Cardsharing NTV Plus

Requirements for Satellite Receiver

Branded NTV Plus receivers (like NTV-PLUS 710HD or VA1020) have closed firmware. You cannot install CCcam or OScam on them — the manufacturer specifically blocks third-party software. You need a receiver based on the Enigma2 operating system — this is an open Linux platform that supports the installation of decoding emulators.

The minimum specifications for the receiver: DVB-S2 tuner, processor from 300 MHz, RAM from 256 MB, Ethernet port (Wi-Fi via USB adapter also works, but is less stable). HDMI is essential for watching HD channels.

Supported Receiver Models with Enigma2

Proven options that work stably with home cardsharing for NTV Plus:

• VU+ Solo SE V2 — one tuner, 1 GB RAM, quiet, consumes little power. Optimal choice for price/quality
• VU+ Duo 4K — two tuners, can watch and record simultaneously. Powerful processor, very fast
• VU+ Zero 4K — budget option, 1 GB RAM, compact. Sufficient for OScam, CCcam may lag
• Dreambox DM920 — a legend among Enigma2 receivers. More expensive than analogs, but build quality and support are top-notch
• Zgemma H9S SE — one DVB-S2X tuner, 1 GB RAM. Good budget option
• Octagon SF8008 — two tuners, 4K, decent performance

If your budget is limited — get the VU+ Zero 4K and install OScam (it consumes less memory than CCcam). If you want comfort and a future-proof option — go for the VU+ Duo 4K or Dreambox DM920.

Satellite Antenna and LNB for NTV Plus

NTV Plus broadcasts from the Eutelsat 36E satellite (position 36.0° East longitude). And here’s the critical point that 90% of online instructions ignore: Eutelsat 36E uses circular polarization (circular R/L). A regular linear LNB (H/V), which is on most dishes, will not receive the signal. You need an LNB with circular polarization — it usually says "Circular" or "C" on the casing.

The size of the dish depends on your region. Central Russia (Moscow, Nizhny Novgorod) — 60 cm is sufficient. South (Krasnodar, Rostov) — 55 cm is enough. Ural — 80 cm. Western Siberia — 90 cm. Eastern Siberia and the Far East — already 1.2 meters or more, because you are on the edge of the satellite's coverage area.

Internet Connection Requirements

Cardsharing transmits only the decryption keys — this is a few kilobytes per second. The video stream comes directly from the satellite. Therefore, internet speed is almost unimportant: 512 kbps is enough. But ping is important — the lower, the faster the keys arrive and the fewer freezes.

The ideal option is wired internet with a ping to the server of less than 80 ms. Mobile 4G also works, but when switching between base stations, there can be brief interruptions — on the screen, this appears as a freeze for 2-3 seconds. 3G is on the edge, it works, but stability is lacking.

Setting Up the Satellite Antenna for Eutelsat 36E

Satellite Parameters for Eutelsat 36E for NTV Plus

Basic parameters for setup:

• Satellite: Eutelsat 36E (36.0° East)
• Polarization: circular (Circular Right / Circular Left)
• Standard: DVB-S and DVB-S2
• Encryption: Viaccess (CAID 0500, ident 043800) and DRE-Crypt (CAID 4AE1)
• Modulation: QPSK and 8PSK

In the receiver settings, create a new satellite or select Eutelsat 36E from the list. Make sure the LNB is set to "Circular" — in some Enigma2 firmware, it is indicated as "9750/9750" (one frequency of the LNB for both polarizations) or simply "Circular LNB".

Main Transponders for NTV Plus 2026

Here is the current table of main transponders. Keep in mind: NTV Plus periodically moves channels, so check the data on thematic forums before setting up.

Frequency, MHz	Polarization	SR	FEC	Standard	Content
12130	Circular L	27500	3/4	DVB-S	SD channels, main package
12226	Circular R	27500	3/4	DVB-S2	HD channels, movies
12265	Circular L	27500	3/4	DVB-S	SD channels, sports
12322	Circular R	27500	3/4	DVB-S2	HD channels, entertainment
12380	Circular L	27500	3/4	DVB-S	SD channels, kids
12456	Circular R	44948	2/3	DVB-S2	Ultra HD package

The symbol rate (SR) for most transponders is 27500. However, there are also non-standard ones: for example, UHD packages use SR 44948. If the receiver does not find channels during automatic scanning — add the transponders manually.

Setting Up DiSEqC with Multiple Satellites

If your dish with a motor mount or DiSEqC switch receives multiple satellites (for example, Hotbird 13E + Astra 4.8E + Eutelsat 36E), then you need to assign a DiSEqC port for each satellite. The usual configuration: DiSEqC 1.0 supports up to 4 satellites, DiSEqC 1.1 — up to 16.

In Enigma2, this is set up through Menu → Setup → Service Searching → Tuner Configuration. For each satellite, select the switch port (A, B, C, D). A common problem with motor mounts: after switching to another satellite and returning to 36E, the receiver does not position accurately. The solution is to save the position USALS/DiSEqC 1.2 manually and disable automatic correction.

Checking Signal Level and Quality

After aiming the antenna, go to the signal information (usually the INFO button on the remote, then select the transponder). You need two indicators: signal level (Signal) and quality (SNR/Quality).

For stable reception: level — above 60%, quality — above 70%. If quality is below 50%, channels will drop even without cardsharing. Adjust the dish by a millimeter in both horizontal and vertical planes — sometimes a shift of 2 mm can yield a quality increase of 15-20%.

CCcam Configuration for NTV Plus Channels

Structure of the CCcam.cfg File

The main configuration file for CCcam is located at /etc/CCcam.cfg. In some Enigma2 images, the path may differ: /var/etc/CCcam.cfg or /usr/keys/CCcam.cfg. Check via SSH:

find / -name "CCcam.cfg" 2>/dev/null

The file has a simple text structure — one directive per line. Comments start with #. Main sections: connection to servers (C-lines), local settings, encoding priorities, logging.

C-line Format for Connecting to the Server

The format for connecting to the cardsharing server:

C: server_address port username password

Example:

C: my.server.com 12000 myuser mypass123