What is sharing: a complete guide to CCcam and OScam

Sharing is a way to access satellite television using shared resources. In this article, we will explore what sharing is, how it works, its pros and cons, and provide detailed instructions on how to set up CCcam and OScam.

What is sharing?

Sharing is the process by which users can share access to TV channels over the internet. This is achieved through special programs that allow the transmission of encrypted signals between receivers and servers.

Definition of sharing

Sharing is a technology that allows multiple users to simultaneously access encrypted television channels. It is used to bypass restrictions on viewing content that is only available for a fee. Sharing can be implemented through various protocols, such as CCcam and OScam.

How sharing works

At the core of sharing is a client-server architecture. The user’s receiver connects to a server that has access to the channels. The server decodes the signal and sends it back to the receiver, allowing the user to watch the content. This data transmission can occur over the internet or a local network.

Advantages and disadvantages

Sharing has its pros and cons. The advantages include the ability to access a large number of channels at a lower price than purchasing subscriptions for individual packages.

Setting up a CCcam server

Setting up a CCcam server may seem like a daunting task, but by following a step-by-step guide, you can do it yourself.

Server requirements

To set up a CCcam server, you will need the following:

• A server with a Linux operating system installed.
• Internet access.
• The CCcam program.

Installing CCcam

Installing CCcam is usually done through the command line. You will need to download the latest version of CCcam from the official website and then install it using the commands:

# cd /usr/local/bin
# wget https://example.com/cccam.tar.gz
# tar -xzf cccam.tar.gz
# rm cccam.tar.gz

Configuring CCcam

Configuring CCcam is done through the file /etc/CCcam.cfg. In this file, you need to specify your server parameters and connection information. An example configuration might look like this:

# CCcam.cfg пример
SERVERIP your.server.ip.address
SERVERPORT 444
USERNAME your_username
PASSWORD your_password

After making changes, restart the CCcam server:

# /etc/init.d/CCcam restart

Setting up an OScam server

OScam is another popular alternative for sharing. Setting up OScam also requires several steps.

Server requirements

To install OScam, you will need the same requirements as for CCcam:

• A server with Linux.
• Internet access.
• The OScam program.

Installing OScam

The installation of OScam can be performed in a similar way to CCcam. First, download OScam and unpack it:

# cd /usr/local/bin
# wget https://example.com/oscam.tar.gz
# tar -xzf oscam.tar.gz
# rm oscam.tar.gz

OScam Configuration

The configuration of OScam is done through files located in the directory /etc/oscam/. The main files for configuration:

• oscam.conf — the main configuration file.
• oscam.server — server settings.
• oscam.user — user settings.

Example configuration oscam.server:

[reader]
label = my_reader
enable = 1
protocol = newcamd
device = your.server.ip.address,2001
key = 0102030405060708091011121314

After configuration, restart OScam:

# /etc/init.d/oscam restart

Troubleshooting

Issues may arise when setting up and using sharing. Let's consider the main problems and their solutions.

Common issues with CCcam

One common problem is the "disconnected" error. This can occur due to an incorrect port or network issues. Check the settings and ensure that port 444 is open.

Common issues with OScam

If OScam does not start, check the logs. They may indicate errors in the configuration, such as incorrect connection parameters or lack of access rights.

Troubleshooting tips

When experiencing connection issues, check the following:

• Your router and firewall settings.
• The correctness of the entered username and password.
• The availability of the server via ping.

Using CCcam in restricted countries

Using CCcam in such conditions requires special attention to the choice of server and its settings. It is important to choose providers that ensure stable operation in regions with strict restrictions.

When setting up CCcam in such countries, it may be necessary to use a VPN or proxy server to bypass blocks. This will hide your IP address and allow access to content that would otherwise be unavailable. However, it should be noted that using a VPN may lead to reduced internet speed, which can affect viewing quality.

Configuration for non-standard equipment

Some users may face the need to configure CCcam or OScam on non-standard equipment, such as old receivers or devices that do not support standard protocols. In such cases, it is important to carefully study the documentation for your equipment and ensure that it is compatible with the chosen software.

For non-standard receivers, it may be necessary to use special firmware images that support operation with CCcam or OScam. These firmwares may be available on specialized forums or websites dedicated to satellite television. Additionally, users may try different versions of CCcam or OScam, as sometimes older versions may work better on outdated equipment.

Compatibility issues between different software versions

When using CCcam and OScam, it is important to consider compatibility between different versions of the software. Sometimes updates can lead to incompatibility with previous versions, which can cause connection and stability issues.

It is recommended to always check version compatibility before updating. If you are using multiple clients to access one server, ensure that they all use compatible versions of the software. In case of compatibility issues, it may be necessary to revert to a previous version of the software that was stable.

Additional tips for configuration and operation

For more effective use of CCcam and OScam, consider several additional tips:

• Regularly update the software to the latest stable versions to avoid vulnerabilities and gain new features.
• Create backups of configuration files so that in case of an error, you can quickly restore the settings.
• Use server monitoring to track their status and quickly respond to possible failures.
• Engage with the user community to share experiences and receive troubleshooting advice.

Who we are and how we verify

Utgard (new.utgard.tv) — card sharing for satellite TV via newcamd and CCcam protocols.

Before publishing information about Utgard — prices, trial access, devices, payment — it is verified against the service data.

Verification date: 03.10.2026